Auto-X setup
2 posters
Page 1 of 1
Auto-X setup
Who is setup for Auto-X and how do you have it set up? Whats your suspension, spring rates, wheels & tires, any tie bars/reinforcement bars?
I am looking into auto-x the Sol and want to have my suspension setup right. It will also be good to have on the back twisty roads.
I am looking into auto-x the Sol and want to have my suspension setup right. It will also be good to have on the back twisty roads.
WORPsol- Posts : 171
Join date : 2011-09-24
Age : 42
Location : Russellville, AR
Re: Auto-X setup
WORPsol wrote:Who is setup for Auto-X and how do you have it set up? Whats your suspension, spring rates, wheels & tires, any tie bars/reinforcement bars?
I am looking into auto-x the Sol and want to have my suspension setup right. It will also be good to have on the back twisty roads.
I never was really into Auto-X at all, but form what I hear full body coilovers is the way to go. I would look into Function and Form, Skunk2, and TEIN. Also front and rear sway bars, and a brace bar in the rear would probably not be a bad idea either. Not really sure if you want to invest in tower strut bars or not, I don't think they are needed...
Re: Auto-X setup
Also, I'm sure it's been done with great sucess but I would not think that the Sol would be the best to Auto-X in with it being a targa top and not being all that ridged. I hear the king of Auto-X in the Honda world is of course the CRX... But good luck anyways!!
Re: Auto-X setup
On my suspension/brake setup is the following. Some items are already installed and some have yet to be installed/fabricated.
Already installed
JIC Majic FLT-A1 full body coil overs
Blox rear LCA's
GSR rear sway
Nuespeed camber kit
WORP Speed B pillar brace/ Harness bar
WORP Speed rear lower tie bar
Integra/EX 10" brakes w/7/8" master
Goodrich SS brake hoses
To be fabricated or installed
WORP Speed 3 point front and 4point rear strut bars
WORP Speed traction bar
WORP Speed roof X brace (under development)
When I installed my harness bar it made a big difference with chassis stillness. Roof is tight again and does not rattle anymore. Also debating on a H brace. Havent upgraded pads and rotors yet.
Already installed
JIC Majic FLT-A1 full body coil overs
Blox rear LCA's
GSR rear sway
Nuespeed camber kit
WORP Speed B pillar brace/ Harness bar
WORP Speed rear lower tie bar
Integra/EX 10" brakes w/7/8" master
Goodrich SS brake hoses
To be fabricated or installed
WORP Speed 3 point front and 4point rear strut bars
WORP Speed traction bar
WORP Speed roof X brace (under development)
When I installed my harness bar it made a big difference with chassis stillness. Roof is tight again and does not rattle anymore. Also debating on a H brace. Havent upgraded pads and rotors yet.
WORPsol- Posts : 171
Join date : 2011-09-24
Age : 42
Location : Russellville, AR
Re: Auto-X setup
[You must be registered and logged in to see this image.]
WORPsol- Posts : 171
Join date : 2011-09-24
Age : 42
Location : Russellville, AR
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|